Gold Member Since 2009
Audited Supplier
Guangdong Pustar Adhesives & Sealants Co., Ltd.

Sealant, Glass Sealant, Pu Sealant manufacturer / supplier in China, offering Pustar Urethane Sealant for Auto Glass, Polyurethane Sealant for Sheet Metal Sealing, PU Sealant for Car Body Polyurethane Sealant and so on.

(/ )

Supplier Homepage Product PU Auto Glass Sealant Pustar Urethane Sealant for Auto Glass

Pustar Urethane Sealant for Auto Glass

FOB Price: US $1.7 / Piece
Min. Order: 3,000 Pieces
Min. Order FOB Price
3,000 Pieces US $1.7/ Piece
Get Latest Price
Port: Shenzhen, China
Transport Package: 310ml 400ml 600ml
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: RENZ 10
  • Application: Windshield
  • Classification: Room Curing
  • Color: Black
  • Origin: Dongguan, China
  • Morphology: Solvent
  • Material: Polyurethane
  • Characteristic: Waterproof
  • Trademark: PUSTAR
  • HS Code: 3506100090
Product Description
Polyurethane Sealant (RENZ 10)

1. Technical Data Sheet

Note;
1) All data above ware tested under standardized condition.
2) All data listed in the chart were series; Please refer to the related datasheet for special items.
3) Storage condition has a direct impact to the products'shelf life, Please refer to the instruction for special items'storing.

2. DESCRIPTION;
RENZ 10 is one component high quality multi-purpose polyurethane sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, RENZ 10 is manufactured in accordance with the ISO/TS 16949: 2002.

3. USES;
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.

4. PACKAGING
310ml cartridge, 20 PCS/carton
600ml/400ml sausage, 20 PCS/carton

5. APPLICATION
Minimum application temperature: 5ºC.
RENZ 10 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply RENZ 10 in a continuous bead using enough pressure to properly fill the joint.

6. ClEANING
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

7. PRIMING
Activators and/or primers is not required.

8. ADVANTAGES:
* One-component formulation.
* Safe Drive Away Time in as little as two hours when used on vehicles with airbag.
* Modest Hardness after curing.
* Flexible, durable and excellent extrudability.
* Need no primer to glass.
* No sagging, no pollution and corrosion to base material and environment.
* Excellent sealing performance, excellent water and aging resistance.

9. ADVICE
* For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
* Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
* This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.


Pustar Urethane Sealant for Auto Glass
Pustar Urethane Sealant for Auto Glass
Testing itemsPerformance
Appearanceblack, homogeneous paste
Cure MechanismHumidity-curing
Density   (g/cm³)1.35±0.05
Touch Dry time   (min)20 ~ 60
Non-sag PropertiesGood
Tear propagation resistance (Mpa)≥ 2.5  
Volatile content (%)≤ 4
Shore A hardness(A°)55±5
Tensile strength( Mpa)≥ 1.5
Elongation at break (%)≥ 400
Extrudability (g/min)80
Application temperature   (ºC)  +5 ~ +35
Shelf life(month)9
Send your message to this supplier
Avatar
Mr. jeafur
sales
*From:
To: Mr. jeafur
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category